Boats

Page 3: Boats Between Free and $30,000 for Sale with Wood

(31 - 45 of 55)
  1. I have Summer Dreams for sale, is rebuilt with a fresh 5litre engine for Vintage Events. The trailer is new with only 10 miles of test ride on it. The trailer is also set up with a pressure water system to run the engine or wash down the boat. All...
    Over 4 weeks ago on Americanlisted
  2. Beautiful custom mahogany drift boat with fiberglass enclosed. Complete with oars, anchor, and trailer.
    Over 4 weeks ago on BoatersNet
  3. I built this Aussie-designed cat from a set of plans purchased from the Sydney Stingray Association (Sail # 339). Hulls are of 3 16” marine mahogany plywood laminated with fiberglass cloth inside and out, and held together with generous amounts ...
    Over 4 weeks ago on BoatersNet
  4. 17ft cedar strip “Whitehall” style rowboat, epoxy fibreglassed inside and out. Phil Bolger designed “Victoria” is a perfect rowboat; Features: • Light, 120lbs with a displacement of 800 lbs • Low maintenance (paint is much tougher and ...
    Over 4 weeks ago on BoatersNet
  5. 1973 Lyman 26 sleeper. 250 Chrysler inboard marine engine. Haven't tried to start. Engine does rotate. Interior was removed by previous owner to varnish all wood. Needs finished and I don't have the time. Title for the boat is in my name. Trailer ...
    Over 4 weeks ago on Americanlisted
  6. 20 Dory Skiff Oakume and Mahogany with 20Hp Yamaha power tilt, electric start. Motor less than a tank of fuel, stored indoors, downriggers, very good condition.
    Over 4 weeks ago on BoatersNet
  7. 2005 wooden gaff rigged dinghy (Tideway class) built by the International Boatbuilding Technical College in Oulton Broad England. Hand built of mahogany planks and oak spars ribs connected with copper nails and roves plus a few screws in key locat...
    Over 4 weeks ago on BoatersNet
  8. This is a painted plywood hull boat that has been about 80% restored and still needs a little more work and have the windshield and trim put back on. I have ALL of the original parts and some new ones. Work completed includes rebuilt carb, starter...
    Over 4 weeks ago on BoatersNet
  9. This is a handcrafted fishing boat built from the Tango Skiff plans. Built from marine plywood, marine epoxy and fiberglass. All plywood is coated with marine epoxy inside and out. Boat is painted inside and out with marine finish paint. This boat...
    Over 4 weeks ago on BoatersNet
  10. Achilles Inflatable USCG certified within the last year Includes: 5 new marine plywood custom floorboards 4 new battens and 2 aluminum siderail battens Two Velcro marine plywood seats Fuel line 1 Underseat stow bag 2 rod holders fishing attachment...
    Over 4 weeks ago on BoatersNet
  11. Custom built in 1954-1956 . Only 60 hours on it until placed in a barn loft beginning in 1962. Removed in 2019 and sold at estate sale in NewYork. This boat is practically new. If you want a wooden classic powerboat that is fun, easy to trailer an...
    Over 4 weeks ago on BoatersNet
  12. it needs total restore I have all the parts in oringnal trailer if you could sent me your phone number I can text pictures cant get them to load
    Over 4 weeks ago on BoatersNet
  13. Needs restored but all there get the outboard running and she could go into the water.
    Over 4 weeks ago on BoatersNet
  14. Turn Key offer: Bolger Payson Skimmer 8 feet by 4 feet (see it in Build the New Instant Boats by Dynamite Payson) Boat; trailer; 1969 Johnson 6hp [not shown]; fuel tank. Near Boston. Fast, stable. Downsizing, reducing fleet. $6 or best offer. also...
    Over 4 weeks ago on BoatersNet
  15. Boat has only seen fresh water
    Over 4 weeks ago on BoatersNet
Email Alerts

Subscribe to email alerts when new listings show up for this search

Sends email alerts to

SET LOCATION