Boats

Page 2: Boats for Sale in Polson, Montana with Thumbnail Wood

(16 - 30 of 44)
  1. 1959 19’ Lyman utility with Gray Marine 109 motor.I bought out of long term inside storage and have started to refinish decks and transom. Could use some hull side paint TLC. Motor runs strong, has new fuel pump but needs carburetor rebuilt, water...
    Over 4 weeks ago on Americanlisted
  2. I have Summer Dreams for sale, is rebuilt with a fresh 5litre engine for Vintage Events. The trailer is new with only 10 miles of test ride on it. The trailer is also set up with a pressure water system to run the engine or wash down the boat. All...
    Over 4 weeks ago on Americanlisted
  3. I have Summer Dreams for sale, is rebuilt with a fresh 5litre engine for Vintage Events. The trailer is new with only 10 miles of test ride on it. The trailer is also set up with a pressure water system to run the engine or wash down the boat. All...
    Over 4 weeks ago on Americanlisted
  4. Classic 1962 Stephens flush deck wood boat, 48' long. 2 bed v-berth in front, queen in rear. Boat needs attention from someone with the time & passion to work on it.Engines are present but not functional. They have worked in past so perhaps someon...
    Over 4 weeks ago on Americanlisted
  5. Single-owner, beautiful example of the popular 28 foot triple birdpit runabout. Based on the classic 1940s Gar Wood designs, this boat is ready to be enjoyed by a new family. Single-owner, beautiful example of the popular 28 foot triple birdpit ru...
    Over 4 weeks ago on ListedBuy
  6. Purchased from the original owner in Louisville, KY in 1998. Engine and boat was completely refastened and restored from 1998 through to 2001. New varnish applied in 2012. Bottom is excellent and water tight. Restoration by the best, engine done b...
    Over 4 weeks ago on ListedBuy
  7. Beautiful custom mahogany drift boat with fiberglass enclosed. Complete with oars, anchor, and trailer.
    Over 4 weeks ago on BoatersNet
  8. Over 4 weeks ago on BoatersNet
  9. I built this Aussie-designed cat from a set of plans purchased from the Sydney Stingray Association (Sail # 339). Hulls are of 3 16” marine mahogany plywood laminated with fiberglass cloth inside and out, and held together with generous amounts ...
    Over 4 weeks ago on BoatersNet
  10. 17ft cedar strip “Whitehall” style rowboat, epoxy fibreglassed inside and out. Phil Bolger designed “Victoria” is a perfect rowboat; Features: • Light, 120lbs with a displacement of 800 lbs • Low maintenance (paint is much tougher and ...
    Over 4 weeks ago on BoatersNet
  11. 1973 Lyman 26 sleeper. 250 Chrysler inboard marine engine. Haven't tried to start. Engine does rotate. Interior was removed by previous owner to varnish all wood. Needs finished and I don't have the time. Title for the boat is in my name. Trailer ...
    Over 4 weeks ago on Americanlisted
  12. 20 Dory Skiff Oakume and Mahogany with 20Hp Yamaha power tilt, electric start. Motor less than a tank of fuel, stored indoors, downriggers, very good condition.
    Over 4 weeks ago on BoatersNet
  13. This is a painted plywood hull boat that has been about 80% restored and still needs a little more work and have the windshield and trim put back on. I have ALL of the original parts and some new ones. Work completed includes rebuilt carb, starter...
    Over 4 weeks ago on BoatersNet
  14. This is a handcrafted fishing boat built from the Tango Skiff plans. Built from marine plywood, marine epoxy and fiberglass. All plywood is coated with marine epoxy inside and out. Boat is painted inside and out with marine finish paint. This boat...
    Over 4 weeks ago on BoatersNet
  15. custom interior
    Over 4 weeks ago on BoatersNet
Email Alerts

Subscribe to email alerts when new listings show up for this search

Sends email alerts to

SET LOCATION

city
country

(undo)Photo

  • With Picture Only (44)

(undo)Material

Year

to

Price

to

Refine By Keyword

Length

to